/usr/share/common-lisp/ros/sensor_msgs/srv/SetCameraInfo.lisp is in cl-sensor-msgs 1.12.5-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 | ; Auto-generated. Do not edit!
(cl:in-package sensor_msgs-srv)
;//! \htmlinclude SetCameraInfo-request.msg.html
(cl:defclass <SetCameraInfo-request> (roslisp-msg-protocol:ros-message)
((camera_info
:reader camera_info
:initarg :camera_info
:type sensor_msgs-msg:CameraInfo
:initform (cl:make-instance 'sensor_msgs-msg:CameraInfo)))
)
(cl:defclass SetCameraInfo-request (<SetCameraInfo-request>)
())
(cl:defmethod cl:initialize-instance :after ((m <SetCameraInfo-request>) cl:&rest args)
(cl:declare (cl:ignorable args))
(cl:unless (cl:typep m 'SetCameraInfo-request)
(roslisp-msg-protocol:msg-deprecation-warning "using old message class name sensor_msgs-srv:<SetCameraInfo-request> is deprecated: use sensor_msgs-srv:SetCameraInfo-request instead.")))
(cl:ensure-generic-function 'camera_info-val :lambda-list '(m))
(cl:defmethod camera_info-val ((m <SetCameraInfo-request>))
(roslisp-msg-protocol:msg-deprecation-warning "Using old-style slot reader sensor_msgs-srv:camera_info-val is deprecated. Use sensor_msgs-srv:camera_info instead.")
(camera_info m))
(cl:defmethod roslisp-msg-protocol:serialize ((msg <SetCameraInfo-request>) ostream)
"Serializes a message object of type '<SetCameraInfo-request>"
(roslisp-msg-protocol:serialize (cl:slot-value msg 'camera_info) ostream)
)
(cl:defmethod roslisp-msg-protocol:deserialize ((msg <SetCameraInfo-request>) istream)
"Deserializes a message object of type '<SetCameraInfo-request>"
(roslisp-msg-protocol:deserialize (cl:slot-value msg 'camera_info) istream)
msg
)
(cl:defmethod roslisp-msg-protocol:ros-datatype ((msg (cl:eql '<SetCameraInfo-request>)))
"Returns string type for a service object of type '<SetCameraInfo-request>"
"sensor_msgs/SetCameraInfoRequest")
(cl:defmethod roslisp-msg-protocol:ros-datatype ((msg (cl:eql 'SetCameraInfo-request)))
"Returns string type for a service object of type 'SetCameraInfo-request"
"sensor_msgs/SetCameraInfoRequest")
(cl:defmethod roslisp-msg-protocol:md5sum ((type (cl:eql '<SetCameraInfo-request>)))
"Returns md5sum for a message object of type '<SetCameraInfo-request>"
"bef1df590ed75ed1f393692395e15482")
(cl:defmethod roslisp-msg-protocol:md5sum ((type (cl:eql 'SetCameraInfo-request)))
"Returns md5sum for a message object of type 'SetCameraInfo-request"
"bef1df590ed75ed1f393692395e15482")
(cl:defmethod roslisp-msg-protocol:message-definition ((type (cl:eql '<SetCameraInfo-request>)))
"Returns full string definition for message of type '<SetCameraInfo-request>"
(cl:format cl:nil "~%~%~%~%~%~%~%~%sensor_msgs/CameraInfo camera_info~%~%================================================================================~%MSG: sensor_msgs/CameraInfo~%# This message defines meta information for a camera. It should be in a~%# camera namespace on topic \"camera_info\" and accompanied by up to five~%# image topics named:~%#~%# image_raw - raw data from the camera driver, possibly Bayer encoded~%# image - monochrome, distorted~%# image_color - color, distorted~%# image_rect - monochrome, rectified~%# image_rect_color - color, rectified~%#~%# The image_pipeline contains packages (image_proc, stereo_image_proc)~%# for producing the four processed image topics from image_raw and~%# camera_info. The meaning of the camera parameters are described in~%# detail at http://www.ros.org/wiki/image_pipeline/CameraInfo.~%#~%# The image_geometry package provides a user-friendly interface to~%# common operations using this meta information. If you want to, e.g.,~%# project a 3d point into image coordinates, we strongly recommend~%# using image_geometry.~%#~%# If the camera is uncalibrated, the matrices D, K, R, P should be left~%# zeroed out. In particular, clients may assume that K[0] == 0.0~%# indicates an uncalibrated camera.~%~%#######################################################################~%# Image acquisition info #~%#######################################################################~%~%# Time of image acquisition, camera coordinate frame ID~%Header header # Header timestamp should be acquisition time of image~% # Header frame_id should be optical frame of camera~% # origin of frame should be optical center of camera~% # +x should point to the right in the image~% # +y should point down in the image~% # +z should point into the plane of the image~%~%~%#######################################################################~%# Calibration Parameters #~%#######################################################################~%# These are fixed during camera calibration. Their values will be the #~%# same in all messages until the camera is recalibrated. Note that #~%# self-calibrating systems may \"recalibrate\" frequently. #~%# #~%# The internal parameters can be used to warp a raw (distorted) image #~%# to: #~%# 1. An undistorted image (requires D and K) #~%# 2. A rectified image (requires D, K, R) #~%# The projection matrix P projects 3D points into the rectified image.#~%#######################################################################~%~%# The image dimensions with which the camera was calibrated. Normally~%# this will be the full camera resolution in pixels.~%uint32 height~%uint32 width~%~%# The distortion model used. Supported models are listed in~%# sensor_msgs/distortion_models.h. For most cameras, \"plumb_bob\" - a~%# simple model of radial and tangential distortion - is sufficient.~%string distortion_model~%~%# The distortion parameters, size depending on the distortion model.~%# For \"plumb_bob\", the 5 parameters are: (k1, k2, t1, t2, k3).~%float64[] D~%~%# Intrinsic camera matrix for the raw (distorted) images.~%# [fx 0 cx]~%# K = [ 0 fy cy]~%# [ 0 0 1]~%# Projects 3D points in the camera coordinate frame to 2D pixel~%# coordinates using the focal lengths (fx, fy) and principal point~%# (cx, cy).~%float64[9] K # 3x3 row-major matrix~%~%# Rectification matrix (stereo cameras only)~%# A rotation matrix aligning the camera coordinate system to the ideal~%# stereo image plane so that epipolar lines in both stereo images are~%# parallel.~%float64[9] R # 3x3 row-major matrix~%~%# Projection/camera matrix~%# [fx' 0 cx' Tx]~%# P = [ 0 fy' cy' Ty]~%# [ 0 0 1 0]~%# By convention, this matrix specifies the intrinsic (camera) matrix~%# of the processed (rectified) image. That is, the left 3x3 portion~%# is the normal camera intrinsic matrix for the rectified image.~%# It projects 3D points in the camera coordinate frame to 2D pixel~%# coordinates using the focal lengths (fx', fy') and principal point~%# (cx', cy') - these may differ from the values in K.~%# For monocular cameras, Tx = Ty = 0. Normally, monocular cameras will~%# also have R = the identity and P[1:3,1:3] = K.~%# For a stereo pair, the fourth column [Tx Ty 0]' is related to the~%# position of the optical center of the second camera in the first~%# camera's frame. We assume Tz = 0 so both cameras are in the same~%# stereo image plane. The first camera always has Tx = Ty = 0. For~%# the right (second) camera of a horizontal stereo pair, Ty = 0 and~%# Tx = -fx' * B, where B is the baseline between the cameras.~%# Given a 3D point [X Y Z]', the projection (x, y) of the point onto~%# the rectified image is given by:~%# [u v w]' = P * [X Y Z 1]'~%# x = u / w~%# y = v / w~%# This holds for both images of a stereo pair.~%float64[12] P # 3x4 row-major matrix~%~%~%#######################################################################~%# Operational Parameters #~%#######################################################################~%# These define the image region actually captured by the camera #~%# driver. Although they affect the geometry of the output image, they #~%# may be changed freely without recalibrating the camera. #~%#######################################################################~%~%# Binning refers here to any camera setting which combines rectangular~%# neighborhoods of pixels into larger \"super-pixels.\" It reduces the~%# resolution of the output image to~%# (width / binning_x) x (height / binning_y).~%# The default values binning_x = binning_y = 0 is considered the same~%# as binning_x = binning_y = 1 (no subsampling).~%uint32 binning_x~%uint32 binning_y~%~%# Region of interest (subwindow of full camera resolution), given in~%# full resolution (unbinned) image coordinates. A particular ROI~%# always denotes the same window of pixels on the camera sensor,~%# regardless of binning settings.~%# The default setting of roi (all values 0) is considered the same as~%# full resolution (roi.width = width, roi.height = height).~%RegionOfInterest roi~%~%================================================================================~%MSG: std_msgs/Header~%# Standard metadata for higher-level stamped data types.~%# This is generally used to communicate timestamped data ~%# in a particular coordinate frame.~%# ~%# sequence ID: consecutively increasing ID ~%uint32 seq~%#Two-integer timestamp that is expressed as:~%# * stamp.sec: seconds (stamp_secs) since epoch (in Python the variable is called 'secs')~%# * stamp.nsec: nanoseconds since stamp_secs (in Python the variable is called 'nsecs')~%# time-handling sugar is provided by the client library~%time stamp~%#Frame this data is associated with~%# 0: no frame~%# 1: global frame~%string frame_id~%~%================================================================================~%MSG: sensor_msgs/RegionOfInterest~%# This message is used to specify a region of interest within an image.~%#~%# When used to specify the ROI setting of the camera when the image was~%# taken, the height and width fields should either match the height and~%# width fields for the associated image; or height = width = 0~%# indicates that the full resolution image was captured.~%~%uint32 x_offset # Leftmost pixel of the ROI~% # (0 if the ROI includes the left edge of the image)~%uint32 y_offset # Topmost pixel of the ROI~% # (0 if the ROI includes the top edge of the image)~%uint32 height # Height of ROI~%uint32 width # Width of ROI~%~%# True if a distinct rectified ROI should be calculated from the \"raw\"~%# ROI in this message. Typically this should be False if the full image~%# is captured (ROI not used), and True if a subwindow is captured (ROI~%# used).~%bool do_rectify~%~%~%"))
(cl:defmethod roslisp-msg-protocol:message-definition ((type (cl:eql 'SetCameraInfo-request)))
"Returns full string definition for message of type 'SetCameraInfo-request"
(cl:format cl:nil "~%~%~%~%~%~%~%~%sensor_msgs/CameraInfo camera_info~%~%================================================================================~%MSG: sensor_msgs/CameraInfo~%# This message defines meta information for a camera. It should be in a~%# camera namespace on topic \"camera_info\" and accompanied by up to five~%# image topics named:~%#~%# image_raw - raw data from the camera driver, possibly Bayer encoded~%# image - monochrome, distorted~%# image_color - color, distorted~%# image_rect - monochrome, rectified~%# image_rect_color - color, rectified~%#~%# The image_pipeline contains packages (image_proc, stereo_image_proc)~%# for producing the four processed image topics from image_raw and~%# camera_info. The meaning of the camera parameters are described in~%# detail at http://www.ros.org/wiki/image_pipeline/CameraInfo.~%#~%# The image_geometry package provides a user-friendly interface to~%# common operations using this meta information. If you want to, e.g.,~%# project a 3d point into image coordinates, we strongly recommend~%# using image_geometry.~%#~%# If the camera is uncalibrated, the matrices D, K, R, P should be left~%# zeroed out. In particular, clients may assume that K[0] == 0.0~%# indicates an uncalibrated camera.~%~%#######################################################################~%# Image acquisition info #~%#######################################################################~%~%# Time of image acquisition, camera coordinate frame ID~%Header header # Header timestamp should be acquisition time of image~% # Header frame_id should be optical frame of camera~% # origin of frame should be optical center of camera~% # +x should point to the right in the image~% # +y should point down in the image~% # +z should point into the plane of the image~%~%~%#######################################################################~%# Calibration Parameters #~%#######################################################################~%# These are fixed during camera calibration. Their values will be the #~%# same in all messages until the camera is recalibrated. Note that #~%# self-calibrating systems may \"recalibrate\" frequently. #~%# #~%# The internal parameters can be used to warp a raw (distorted) image #~%# to: #~%# 1. An undistorted image (requires D and K) #~%# 2. A rectified image (requires D, K, R) #~%# The projection matrix P projects 3D points into the rectified image.#~%#######################################################################~%~%# The image dimensions with which the camera was calibrated. Normally~%# this will be the full camera resolution in pixels.~%uint32 height~%uint32 width~%~%# The distortion model used. Supported models are listed in~%# sensor_msgs/distortion_models.h. For most cameras, \"plumb_bob\" - a~%# simple model of radial and tangential distortion - is sufficient.~%string distortion_model~%~%# The distortion parameters, size depending on the distortion model.~%# For \"plumb_bob\", the 5 parameters are: (k1, k2, t1, t2, k3).~%float64[] D~%~%# Intrinsic camera matrix for the raw (distorted) images.~%# [fx 0 cx]~%# K = [ 0 fy cy]~%# [ 0 0 1]~%# Projects 3D points in the camera coordinate frame to 2D pixel~%# coordinates using the focal lengths (fx, fy) and principal point~%# (cx, cy).~%float64[9] K # 3x3 row-major matrix~%~%# Rectification matrix (stereo cameras only)~%# A rotation matrix aligning the camera coordinate system to the ideal~%# stereo image plane so that epipolar lines in both stereo images are~%# parallel.~%float64[9] R # 3x3 row-major matrix~%~%# Projection/camera matrix~%# [fx' 0 cx' Tx]~%# P = [ 0 fy' cy' Ty]~%# [ 0 0 1 0]~%# By convention, this matrix specifies the intrinsic (camera) matrix~%# of the processed (rectified) image. That is, the left 3x3 portion~%# is the normal camera intrinsic matrix for the rectified image.~%# It projects 3D points in the camera coordinate frame to 2D pixel~%# coordinates using the focal lengths (fx', fy') and principal point~%# (cx', cy') - these may differ from the values in K.~%# For monocular cameras, Tx = Ty = 0. Normally, monocular cameras will~%# also have R = the identity and P[1:3,1:3] = K.~%# For a stereo pair, the fourth column [Tx Ty 0]' is related to the~%# position of the optical center of the second camera in the first~%# camera's frame. We assume Tz = 0 so both cameras are in the same~%# stereo image plane. The first camera always has Tx = Ty = 0. For~%# the right (second) camera of a horizontal stereo pair, Ty = 0 and~%# Tx = -fx' * B, where B is the baseline between the cameras.~%# Given a 3D point [X Y Z]', the projection (x, y) of the point onto~%# the rectified image is given by:~%# [u v w]' = P * [X Y Z 1]'~%# x = u / w~%# y = v / w~%# This holds for both images of a stereo pair.~%float64[12] P # 3x4 row-major matrix~%~%~%#######################################################################~%# Operational Parameters #~%#######################################################################~%# These define the image region actually captured by the camera #~%# driver. Although they affect the geometry of the output image, they #~%# may be changed freely without recalibrating the camera. #~%#######################################################################~%~%# Binning refers here to any camera setting which combines rectangular~%# neighborhoods of pixels into larger \"super-pixels.\" It reduces the~%# resolution of the output image to~%# (width / binning_x) x (height / binning_y).~%# The default values binning_x = binning_y = 0 is considered the same~%# as binning_x = binning_y = 1 (no subsampling).~%uint32 binning_x~%uint32 binning_y~%~%# Region of interest (subwindow of full camera resolution), given in~%# full resolution (unbinned) image coordinates. A particular ROI~%# always denotes the same window of pixels on the camera sensor,~%# regardless of binning settings.~%# The default setting of roi (all values 0) is considered the same as~%# full resolution (roi.width = width, roi.height = height).~%RegionOfInterest roi~%~%================================================================================~%MSG: std_msgs/Header~%# Standard metadata for higher-level stamped data types.~%# This is generally used to communicate timestamped data ~%# in a particular coordinate frame.~%# ~%# sequence ID: consecutively increasing ID ~%uint32 seq~%#Two-integer timestamp that is expressed as:~%# * stamp.sec: seconds (stamp_secs) since epoch (in Python the variable is called 'secs')~%# * stamp.nsec: nanoseconds since stamp_secs (in Python the variable is called 'nsecs')~%# time-handling sugar is provided by the client library~%time stamp~%#Frame this data is associated with~%# 0: no frame~%# 1: global frame~%string frame_id~%~%================================================================================~%MSG: sensor_msgs/RegionOfInterest~%# This message is used to specify a region of interest within an image.~%#~%# When used to specify the ROI setting of the camera when the image was~%# taken, the height and width fields should either match the height and~%# width fields for the associated image; or height = width = 0~%# indicates that the full resolution image was captured.~%~%uint32 x_offset # Leftmost pixel of the ROI~% # (0 if the ROI includes the left edge of the image)~%uint32 y_offset # Topmost pixel of the ROI~% # (0 if the ROI includes the top edge of the image)~%uint32 height # Height of ROI~%uint32 width # Width of ROI~%~%# True if a distinct rectified ROI should be calculated from the \"raw\"~%# ROI in this message. Typically this should be False if the full image~%# is captured (ROI not used), and True if a subwindow is captured (ROI~%# used).~%bool do_rectify~%~%~%"))
(cl:defmethod roslisp-msg-protocol:serialization-length ((msg <SetCameraInfo-request>))
(cl:+ 0
(roslisp-msg-protocol:serialization-length (cl:slot-value msg 'camera_info))
))
(cl:defmethod roslisp-msg-protocol:ros-message-to-list ((msg <SetCameraInfo-request>))
"Converts a ROS message object to a list"
(cl:list 'SetCameraInfo-request
(cl:cons ':camera_info (camera_info msg))
))
;//! \htmlinclude SetCameraInfo-response.msg.html
(cl:defclass <SetCameraInfo-response> (roslisp-msg-protocol:ros-message)
((success
:reader success
:initarg :success
:type cl:boolean
:initform cl:nil)
(status_message
:reader status_message
:initarg :status_message
:type cl:string
:initform ""))
)
(cl:defclass SetCameraInfo-response (<SetCameraInfo-response>)
())
(cl:defmethod cl:initialize-instance :after ((m <SetCameraInfo-response>) cl:&rest args)
(cl:declare (cl:ignorable args))
(cl:unless (cl:typep m 'SetCameraInfo-response)
(roslisp-msg-protocol:msg-deprecation-warning "using old message class name sensor_msgs-srv:<SetCameraInfo-response> is deprecated: use sensor_msgs-srv:SetCameraInfo-response instead.")))
(cl:ensure-generic-function 'success-val :lambda-list '(m))
(cl:defmethod success-val ((m <SetCameraInfo-response>))
(roslisp-msg-protocol:msg-deprecation-warning "Using old-style slot reader sensor_msgs-srv:success-val is deprecated. Use sensor_msgs-srv:success instead.")
(success m))
(cl:ensure-generic-function 'status_message-val :lambda-list '(m))
(cl:defmethod status_message-val ((m <SetCameraInfo-response>))
(roslisp-msg-protocol:msg-deprecation-warning "Using old-style slot reader sensor_msgs-srv:status_message-val is deprecated. Use sensor_msgs-srv:status_message instead.")
(status_message m))
(cl:defmethod roslisp-msg-protocol:serialize ((msg <SetCameraInfo-response>) ostream)
"Serializes a message object of type '<SetCameraInfo-response>"
(cl:write-byte (cl:ldb (cl:byte 8 0) (cl:if (cl:slot-value msg 'success) 1 0)) ostream)
(cl:let ((__ros_str_len (cl:length (cl:slot-value msg 'status_message))))
(cl:write-byte (cl:ldb (cl:byte 8 0) __ros_str_len) ostream)
(cl:write-byte (cl:ldb (cl:byte 8 8) __ros_str_len) ostream)
(cl:write-byte (cl:ldb (cl:byte 8 16) __ros_str_len) ostream)
(cl:write-byte (cl:ldb (cl:byte 8 24) __ros_str_len) ostream))
(cl:map cl:nil #'(cl:lambda (c) (cl:write-byte (cl:char-code c) ostream)) (cl:slot-value msg 'status_message))
)
(cl:defmethod roslisp-msg-protocol:deserialize ((msg <SetCameraInfo-response>) istream)
"Deserializes a message object of type '<SetCameraInfo-response>"
(cl:setf (cl:slot-value msg 'success) (cl:not (cl:zerop (cl:read-byte istream))))
(cl:let ((__ros_str_len 0))
(cl:setf (cl:ldb (cl:byte 8 0) __ros_str_len) (cl:read-byte istream))
(cl:setf (cl:ldb (cl:byte 8 8) __ros_str_len) (cl:read-byte istream))
(cl:setf (cl:ldb (cl:byte 8 16) __ros_str_len) (cl:read-byte istream))
(cl:setf (cl:ldb (cl:byte 8 24) __ros_str_len) (cl:read-byte istream))
(cl:setf (cl:slot-value msg 'status_message) (cl:make-string __ros_str_len))
(cl:dotimes (__ros_str_idx __ros_str_len msg)
(cl:setf (cl:char (cl:slot-value msg 'status_message) __ros_str_idx) (cl:code-char (cl:read-byte istream)))))
msg
)
(cl:defmethod roslisp-msg-protocol:ros-datatype ((msg (cl:eql '<SetCameraInfo-response>)))
"Returns string type for a service object of type '<SetCameraInfo-response>"
"sensor_msgs/SetCameraInfoResponse")
(cl:defmethod roslisp-msg-protocol:ros-datatype ((msg (cl:eql 'SetCameraInfo-response)))
"Returns string type for a service object of type 'SetCameraInfo-response"
"sensor_msgs/SetCameraInfoResponse")
(cl:defmethod roslisp-msg-protocol:md5sum ((type (cl:eql '<SetCameraInfo-response>)))
"Returns md5sum for a message object of type '<SetCameraInfo-response>"
"bef1df590ed75ed1f393692395e15482")
(cl:defmethod roslisp-msg-protocol:md5sum ((type (cl:eql 'SetCameraInfo-response)))
"Returns md5sum for a message object of type 'SetCameraInfo-response"
"bef1df590ed75ed1f393692395e15482")
(cl:defmethod roslisp-msg-protocol:message-definition ((type (cl:eql '<SetCameraInfo-response>)))
"Returns full string definition for message of type '<SetCameraInfo-response>"
(cl:format cl:nil "bool success~%string status_message~%~%~%~%"))
(cl:defmethod roslisp-msg-protocol:message-definition ((type (cl:eql 'SetCameraInfo-response)))
"Returns full string definition for message of type 'SetCameraInfo-response"
(cl:format cl:nil "bool success~%string status_message~%~%~%~%"))
(cl:defmethod roslisp-msg-protocol:serialization-length ((msg <SetCameraInfo-response>))
(cl:+ 0
1
4 (cl:length (cl:slot-value msg 'status_message))
))
(cl:defmethod roslisp-msg-protocol:ros-message-to-list ((msg <SetCameraInfo-response>))
"Converts a ROS message object to a list"
(cl:list 'SetCameraInfo-response
(cl:cons ':success (success msg))
(cl:cons ':status_message (status_message msg))
))
(cl:defmethod roslisp-msg-protocol:service-request-type ((msg (cl:eql 'SetCameraInfo)))
'SetCameraInfo-request)
(cl:defmethod roslisp-msg-protocol:service-response-type ((msg (cl:eql 'SetCameraInfo)))
'SetCameraInfo-response)
(cl:defmethod roslisp-msg-protocol:ros-datatype ((msg (cl:eql 'SetCameraInfo)))
"Returns string type for a service object of type '<SetCameraInfo>"
"sensor_msgs/SetCameraInfo")
|