castle-game-engine-src 5.2.0-3 / usr / src / castle-game-engine-5.2.0 / 3d / castletriangles_dualimplementation.inc

{
  Copyright 2003-2014 Michalis Kamburelis.

  This file is part of "Castle Game Engine".

  "Castle Game Engine" is free software; see the file COPYING.txt,
  included in this distribution, for details about the copyright.

  "Castle Game Engine" is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

  ----------------------------------------------------------------------------
}

{ CastleTriangles Implementation parameterized with macros,
  so that it's suitable for both Single and Double versions. }

function IsValidTriangle(const Tri: TTriangle3): boolean;
begin
  (* chcemy sprawdzic czy Tri nie jest zdegenerowanym trojkatem, czyli czy
     wyznacza dobra plaszczyzne; wiec nie tylko wszstkie punkty musza byc
     rozne ale tez nie moga byc wspolliniowe. Jak to najlatwiej sprawdzic ?

     Sprawdzajac czy VectorProduct(
       VectorSubtract(Tri[2], Tri[1]),
       VectorSubtract(Tri[0], Tri[1]))
     ma dlugosc > 0.
     Mozna to uzasadnic na dwa sposoby : prosto i nie do konca scisle -
     liczymy TrianglePlane uzywajac takiego wlasnie VectorProduct, a przeciez
     chcemy wlasnie sprawdzic czy TrianglePlane zwroci prawidlowy plane.
     Albo inaczej : te trzy punkty wyznaczaja plaszczyzne wtw. gdy rownoleglobok
     ktorego dwa boki tworza wektory Tri[2]-Tri[1] i Tri[0]-Tri[1] ma niezerowe
     pole. A przeciez dlugosc VectorProduct to pole tego rownolegloboku.
     Wiec testujac dlugosc VectorProduct testujemy dlugosc tego rownolegloboku.

     Taki VectorProduct() mozemy obliczyc uzywajac TriangleDir().
  *)
  result := VectorLenSqr(TriangleDir(Tri)) > Sqr(ScalarEqualityEpsilon);
end;

function TriangleDir(const Tri: TTriangle3): TVector3;
begin
  result := VectorProduct(
    VectorSubtract(Tri[2], Tri[1]),
    VectorSubtract(Tri[0], Tri[1]));
end;

function TriangleDir(const p0, p1, p2: TVector3): TVector3;
begin
  result := VectorProduct(
    VectorSubtract(p2, p1),
    VectorSubtract(p0, p1));
end;

function TriangleNormal(const Tri: TTriangle3): TVector3;
begin
  result := Normalized( TriangleDir(Tri) );
end;

function TriangleNormal(const p0, p1, p2: TVector3): TVector3;
begin
  result := Normalized( TriangleDir(p0, p1, p2) );
end;

function TrianglePlane(const Tri: TTriangle3): TVector4;
var
  ResultDir: TVector3 absolute result;
begin
  ResultDir := TriangleDir(Tri);
  (* Punkt Tri[0] musi lezec na plane result. Wiec musi zachodzic
     ResulrDir[0]*Tri[0, 0] + ResulrDir[1]*Tri[0, 1] + ResulrDir[2]*Tri[0, 2]
       + result[3] = 0.
     Stad widac jak wyznaczyc result[3]. *)
  result[3] := -ResultDir[0]*Tri[0, 0]
               -ResultDir[1]*Tri[0, 1]
               -ResultDir[2]*Tri[0, 2];
end;

function TrianglePlane(const p0, p1, p2: TVector3): TVector4;
var
  ResultDir: TVector3 absolute result;
begin
  ResultDir := TriangleDir(p0, p1, p2);
  result[3] := -ResultDir[0]*p0[0]
               -ResultDir[1]*p0[1]
               -ResultDir[2]*p0[2];
end;

function TriangleNormPlane(const Tri: TTriangle3): TVector4;
var
  resultNormal: TVector3 absolute result;
begin
  (* dzialamy tak samo jak TrianglePlane tyle ze teraz uzywamy TriangleNormal
     zamiast TriangleNormalNotNorm *)
  resultNormal := TriangleNormal(Tri);
  result[3] := -resultNormal[0]*Tri[0, 0] -resultNormal[1]*Tri[0, 1]
    -resultNormal[2]*Tri[0, 2];
end;

function TriangleTransform(const Tri: TTriangle3; const M: TMatrix4): TTriangle3;
begin
  Result[0] := MatrixMultPoint(M, Tri[0]);
  Result[1] := MatrixMultPoint(M, Tri[1]);
  Result[2] := MatrixMultPoint(M, Tri[2]);
end;

function TriangleArea(const Tri: TTriangle3): TScalar;
begin
  result := VectorLen(
    VectorProduct(VectorSubtract(Tri[1], Tri[0]),
                  VectorSubtract(Tri[2], Tri[0]))) / 2;
end;

function TriangleAreaSqr(const Tri: TTriangle3): TScalar;
begin
  result := VectorLenSqr(
    VectorProduct(VectorSubtract(Tri[1], Tri[0]),
                  VectorSubtract(Tri[2], Tri[0]))) / 4;
end;

function IsPointWithinTriangle2d(const P: TVector2; const Tri: TTriangle2): boolean;
var
  TriMiddle: TVector2;
  line: TVector3;
  i: integer;
begin
  TriMiddle := VectorAdd( VectorAdd(VectorScale(Tri[0], 1/3), VectorScale(Tri[1], 1/3)), VectorScale(Tri[2], 1/3));
  (* teraz dla kazdej z 3 prostych zawierajacych boki trojkata
     P musi byc po tej samej stronie prostej co TriMiddle. *)
  for i := 0 to 2 do
  begin
    line := LineOfTwoDifferentPoints2d(Tri[i], Tri[(i+1)mod 3]);
    if TriMiddle[0]*line[0] + TriMiddle[1]*line[1] + line[2] >= 0 then
    begin
      if P[0]*line[0] + P[1]*line[1] + line[2] < -ScalarEqualityEpsilon then exit(false);
    end else
    begin
      if P[0]*line[0] + P[1]*line[1] + line[2] > ScalarEqualityEpsilon then exit(false);
    end;
  end;

  result := true;
end;

function IsPointOnTrianglePlaneWithinTriangle(const P: TVector3;
  const Tri: TTriangle3; const TriDir: TVector3): boolean;

{ We tried many approaches for this:
  - Check do three angles:
    between vectors (t[0]-p) and (t[1]-p),
    between vectors (t[1]-p) and (t[2]-p),
    between vectors (t[2]-p) and (t[0]-p)
    sum to full 360 stopni.
  - Cast triangle on the most suitable 2D plane, and check there.

  The current algorithm is very slightly faster than the above. It's based on
  http://geometryalgorithms.com/Archive/algorithm_0105/algorithm_0105.htm
  (still accessible through
  http://web.archive.org/web/20081018162011/http://www.geometryalgorithms.com/Archive/algorithm_0105/algorithm_0105.htm
  ).

  Idea:
  - Every point on the plane of our triangle may be expressed as s,t, such that
    point = tri[0] + s*u + t*v, where u = tri[1]-tri[0], v = tri[2]-tri[0].
    This way 2 triangle edges determine the 2D coordinates axes,
    analogous to normal OX and OY axes on a 2D plane.
    (We only handle non-degenerate triangles is, so we can assume that
    all triangle points are different and u is not parallel to v.)

  - Point is within the triangle iff s >= 0 and t >= 0 and s+t <= 1.
    (Some reason: note that point = tri[0]*(1-s-t) + tri[1]*s + tri[2]*t,
    so s,t are just 2 barycentric coordinates of our point.)

  - It remains to find s,t.
    Let w = point - tri[0], so w = s*u + t*v.
    Let x^ (for x = direction on a plane) mean VectorProduct(x, PlaneDir),
    so a direction orthogonal to x and still on the plane.
    Note some dot product properties:

      (a + b).c = a.c + b.c
      (x * a).c = x * (a.c)
      where a, b, c are some vectors, x is scalar, * is scalar multiplication.

    Now make a dot product of both sides of "w = ..." equation with v^,
    and use the dot product properties mentioned above:

      w.v^ = s*u.v^ + t*v.v^

    v.v^ = 0, because v and v^ are orthogonal.
    So we can calculate s as

      s := w.v^ / (u.v^)

    Analogously, we can calculate v.

  - With some optimizations, this can be further simplified,
    but we found out that the simplified version is actually slightly slower.
}

{ $define IsPointOnTrianglePlaneWithinTriangle_Simplified}
{$ifdef IsPointOnTrianglePlaneWithinTriangle_Simplified}

var
  S, T, One, UU, UV, VV, WV, WU, Denominator: TScalar;
  W, U, V: TVector3;
begin
  U := VectorSubtract(Tri[1], Tri[0]);
  V := VectorSubtract(Tri[2], Tri[0]);
  UV := VectorDotProduct(U, V);
  UU := VectorLenSqr(U); { = VectorDotProduct(U, U) }
  VV := VectorLenSqr(V); { = VectorDotProduct(V, V) }
  Denominator := Sqr(UV) - UU * VV;

  W := VectorSubtract(P, Tri[0]);
  WV := VectorDotProduct(W, V);
  WU := VectorDotProduct(W, U);

  One := 1 + ScalarEqualityEpsilon;

  S := (UV * WV - VV * WU) / Denominator;
  if (S < -ScalarEqualityEpsilon) or
    { As far as only correctness is concerned, check for S > One isn't needed
      here since we will check S+T <= One later anyway.
      But for the speed, it's better to make here a quick check
      "S > One" and in many cases avoid the long calculation of T.
      See ~/3dmodels/rayhunter-demos/raporty/2006-11-12/README:
      speed of this procedure has a significant impact
      on the ray-tracer speed, so it's really a justified optimization. }
     (S > One) then
    Exit(false);

  T := (UV * WU - UU * WV) / Denominator;
  if T < -ScalarEqualityEpsilon then
    Exit(false);

  result := S + T <= One;
end;

{$else}

var
  S, T: TScalar;
  W, U, V, Ortho: TVector3;
  One: TScalar;
begin
  U := VectorSubtract(Tri[1], Tri[0]);
  V := VectorSubtract(Tri[2], Tri[0]);
  W := VectorSubtract(P, Tri[0]);

  One := 1 + ScalarEqualityEpsilon;

  Ortho := VectorProduct(V, TriDir);
  S := VectorDotProduct(W, Ortho) / VectorDotProduct(U, Ortho);
  if (S < -ScalarEqualityEpsilon) or
    { As far as only correctness is concerned, check for S > One isn't needed
      here since we will check S+T <= One later anyway.
      But for the speed, it's better to make here a quick check
      "S > One" and in many cases avoid the long calculation of T.
      See ~/3dmodels/rayhunter-demos/raporty/2006-11-12/README:
      speed of this procedure has a significant impact
      on the ray-tracer speed, so it's really a justified optimization. }
     (S > One) then
    Exit(false);

  Ortho := VectorProduct(U, TriDir);
  T := VectorDotProduct(W, Ortho) / VectorDotProduct(V, Ortho);
  if T < -ScalarEqualityEpsilon then
    Exit(false);

  result := S + T <= One;
end;

{$endif IsPointOnTrianglePlaneWithinTriangle_Simplified}

//function IsPointOnTrianglePlaneWithinTriangle(const P: TVector3;
//  const Tri: TTriangle3): boolean;
//begin
//  result := IsPointOnTrianglePlaneWithinTriangle(P, Tri, TriangleDir(Tri));
//end;

{$define TryTriangleRayCollision_IMPLEMENT:=
var
  MaybeIntersection: TVector3;
  MaybeT: TScalar;
  TriDir: TVector3 absolute TriPlane;
begin
  result := TryPlaneRayIntersection(MaybeIntersection, MaybeT, TriPlane, RayOrigin, RayDirection) and
          IsPointOnTrianglePlaneWithinTriangle(MaybeIntersection, Tri, TriDir);
  if result then
  begin
    Intersection := MaybeIntersection;
    {$ifdef HAS_T} T := MaybeT; {$endif}
  end;
end;}

{$define TryTriangleSegmentDirCollision_IMPLEMENT:=
var
  MaybeIntersection: TVector3;
  MaybeT: TScalar;
  TriDir: TVector3 absolute TriPlane;
begin
  result := TryPlaneSegmentDirIntersection(MaybeIntersection, MaybeT, TriPlane, Segment0, SegmentVector) and
          IsPointOnTrianglePlaneWithinTriangle(MaybeIntersection, Tri, TriDir);
  if result then
  begin
    Intersection := MaybeIntersection;
    {$ifdef HAS_T} T := MaybeT; {$endif}
  end;
end;}

function IsTriangleSegmentCollision(const Tri: TTriangle3;
  const TriPlane: TVector4; const pos1, pos2: TVector3): boolean;
var
  lineVector, MaybeIntersection: TVector3;
  TriDir: TVector3 absolute TriPlane;
begin
  lineVector := VectorSubtract(pos2, pos1);
  result := TryPlaneLineIntersection(MaybeIntersection, TriPlane, pos1, lineVector) and
            IsPointOnSegmentLineWithinSegment(MaybeIntersection, pos1, pos2) and
            IsPointOnTrianglePlaneWithinTriangle(MaybeIntersection, Tri, TriDir);
end;

function IsTriangleSegmentCollision(const Tri: TTriangle3; const pos1, pos2: TVector3): boolean;
begin
  result := IsTriangleSegmentCollision(Tri, TrianglePlane(Tri), pos1, pos2);
end;

function TryTriangleSegmentCollision(var Intersection: TVector3;
  const Tri: TTriangle3; const TriPlane: TVector4;
  const pos1, pos2: TVector3): boolean;
begin
  result := TryTriangleSegmentDirCollision(Intersection, Tri, TriPlane,
    Pos1, VectorSubtract(Pos2, Pos1));
end;

function TryTriangleSegmentDirCollision(var Intersection: TVector3; var T: TScalar;
  const Tri: TTriangle3; const TriPlane: TVector4;
  const Segment0, SegmentVector: TVector3): boolean;
{$define HAS_T}
TryTriangleSegmentDirCollision_IMPLEMENT
{$undef HAS_T}

function TryTriangleSegmentDirCollision(var Intersection: TVector3;
  const Tri: TTriangle3; const TriPlane: TVector4;
  const Segment0, SegmentVector: TVector3): boolean;
TryTriangleSegmentDirCollision_IMPLEMENT

function IsTriangleSphereCollision(const Tri: TTriangle3;
  const TriPlane: TVector4;
  const SphereCenter: TVector3; SphereRadius: TScalar): boolean;
(*$define HAS_PRECALC_PLANE*)
(*$I castletriangles_istrianglespherecollision.inc*)
(*$undef HAS_PRECALC_PLANE*)

function IsTriangleSphereCollision(const Tri: TTriangle3;
  const SphereCenter: TVector3; SphereRadius: TScalar): boolean;
(*$I castletriangles_istrianglespherecollision.inc*)

function TryTriangleRayCollision(var Intersection: TVector3; var T: TScalar;
  const Tri: TTriangle3; const TriPlane: TVector4;
  const RayOrigin, RayDirection: TVector3): boolean;
{$define HAS_T}
TryTriangleRayCollision_IMPLEMENT
{$undef HAS_T}

function TryTriangleRayCollision(var Intersection: TVector3;
  const Tri: TTriangle3; const TriPlane: TVector4;
  const RayOrigin, RayDirection: TVector3): boolean;
TryTriangleRayCollision_IMPLEMENT

{ triangles and strings ------------------------------------------------------ }

function TriangleToNiceStr(const t: TTriangle2): string;
begin
  result := '['+VectorToNiceStr(t[0])+', '
               +VectorToNiceStr(t[1])+', '
               +VectorToNiceStr(t[2])+']';
end;

function TriangleToNiceStr(const t: TTriangle3): string;
begin
  result := '['+VectorToNiceStr(t[0])+', '
               +VectorToNiceStr(t[1])+', '
               +VectorToNiceStr(t[2])+']';
end;

function TriangleToRawStr(const T: TTriangle3): string;
begin
  Result := '[' + VectorToRawStr(T[0]) + ', '
                + VectorToRawStr(T[1]) + ', '
                + VectorToRawStr(T[2]) + ']';
end;