/usr/share/doc/sg3-utils/README.sg_start is in sg3-utils 1.39-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 | Hi,
you can use sg_start to start (spin-up, 1) and stop (spin-down, 0) devices.
I also offers a parameter (-s) to send a synchronize cache command to a
device, so it should write back its internal buffers to the medium.
Be aware that the Linux SCSI subsystem at this time does not automatically
starts stopped devices, so stopping a device which is in use may have fatal
results for you.
So, you should apply with care.
I use it in my shutdown script at the end (before the poweroff command):
# SG_SHUG_NOS is set in my config file rc.config
# SG_SHUT_NOS="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15"
if test -x /bin/sg_start; then
if test "`basename $command`" = "reboot"; then
for no in $SG_SHUT_NOS;
do /bin/sg_start /dev/sg$no -s >/dev/null 2>&1;
done
else
for no in $SG_SHUT_NOS;
do /bin/sg_start /dev/sg$no -s 0 >/dev/null 2>&1;
done
fi
fi
Enjoy!
Kurt Garloff <garloff at suse dot de>
Postscript
==========
sg_start has been reworked to allow a block device (e.g. /dev/sda) in
addition to the sg device name (e.g. /dev/sg0) in the lk 2.6 series.
sg_start now has more command line options, see its man page.
Douglas Gilbert <dgilbert at interlog dot com> 2004/5/8
|