pynslcd 0.9.4-3+deb8u2 / postinst

#!/bin/sh

set -e

CONFFILE="/etc/nslcd.conf"

# set an option in the configuration file to the specified value
cfg_set()
{
  parameter="$1"
  value="$2"
  # check if the parameter is defined
  line=`sed -n '/^'"$parameter"'[[:space:]]*\(aliases\|ethers\|group\|hosts\|netgroup\|networks\|passwd\|protocols\|rpc\|services\|shadow\)[[:space:]]/d;/^'"$parameter"'[[:space:]]/p' "$CONFFILE" | head -n 1`
  if [ -z "$line" ]
  then
    # check if the parameter is commented out
    line=`sed -n '/^#'"$parameter"'[[:space:]]*[aeghnprs][acedgihklopsrutwv]*[[:space:]]/d;/^#'"$parameter"'[[:space:]]/p' "$CONFFILE" | head -n 1`
  fi
  # decide what to do
  if [ -z "$line" ]
  then
    # just append a new line
    echo "$parameter $value" >> $CONFFILE
  else
    # escape line to replace
    replace=`echo "$line" | sed 's#\\\#\\\\\\\#g;s#\([.*+?^$|]\)#\\\\\1#g'`
    # escape value (parameter doesn't have any special stuff)
    value=`echo "$value" | sed 's#\\\#\\\\\\\#g;s#|#\\\|#g;s#&#\\\&#g'`
    # replace the first occurrence of the line
    sed -i '1,\|^'"$replace"'$| s|^'"$replace"'$|'"$parameter"' '"$value"'|i' "$CONFFILE"
  fi
  # we're done
  return 0
}

# disable options in the configuration file by commenting them out
cfg_disable()
{
  for parameter in $@
  do
    # handle bindpw option specially by removing value from config first
    if [ "$parameter" = "bindpw" ] && grep -i -q "^bindpw " $CONFFILE
    then
      cfg_set bindpw "*removed*"
    fi
    # make matching of spaces better in parameter
    param_re=`echo "$parameter" | sed 's#^#[[:space:]]*#;s#[[:space:]][[:space:]]*#[[:space:]][[:space:]]*#g'`
    # lines to not match
    nomatch_re="^$param_re[[:space:]][[:space:]]*\(aliases\|ethers\|group\|hosts\|netgroup\|networks\|passwd\|protocols\|rpc\|services\|shadow\)"
    # comment out the option
    sed -i '/'"$nomatch_re"'/!s/^'"$param_re"'[[:space:]].*$/#&/i' "$CONFFILE"
    # we're done
  done
  return 0
}

# set the list of uris
cfg_uris()
{
  uris="$1"
  # escape all uri directives
  sed -i 's/^uri /_uri_ /i' $CONFFILE
  # set the uri options
  echo "$uris" | sed 's/^[[:space:]]*//;s/[[:space:]]*$//;s/[[:space:]][[:space:]]*/\n/g' | while read uri
  do
    if grep -qi '^_uri_ ' $CONFFILE
    then
      # escape uri for use in regexp replacement
      uri=`echo "$uri" | sed 's#\\\#\\\\\\\#g;s#|#\\\|#g;s#&#\\\&#g'`
      # replace the first occurrence of _uri_
      sed -i '1,/^_uri_ / s|^_uri_ .*$|uri '"$uri"'|i' "$CONFFILE"
    else
      # append new uri
      echo "uri $uri" >> $CONFFILE
    fi
  done
  # comment out the remaining escaped uris
  sed -i 's/^_uri_ /#uri /' $CONFFILE
}

# create a default configuration file if nothing exists yet
create_config()
{
  if [ ! -e "$CONFFILE" ]
  then
    # create a simple configuration file from this template
    cat > "$CONFFILE" << EOM
# $CONFFILE
# nslcd configuration file. See nslcd.conf(5)
# for details.

# The user and group nslcd should run as.
uid nslcd
gid nslcd

# The location at which the LDAP server(s) should be reachable.
uri ldap://localhost/

# The search base that will be used for all queries.
base dc=example,dc=net

# The LDAP protocol version to use.
#ldap_version 3

# The DN to bind with for normal lookups.
#binddn cn=annonymous,dc=example,dc=net
#bindpw secret

# The DN used for password modifications by root.
#rootpwmoddn cn=admin,dc=example,dc=com

# SSL options
#ssl off
#tls_reqcert never
tls_cacertfile /etc/ssl/certs/ca-certificates.crt

# The search scope.
#scope sub

EOM
    # fix permissions
    chmod 640 "$CONFFILE"
    chown root:nslcd "$CONFFILE"
  fi
  # we're done
  return 0
}

# update a configuration parameter, based on the debconf key
update_config()
{
  debconf_param="$1"
  cfg_param="$2"
  # update configuration option based on debconf value
  db_get "$debconf_param"
  if [ -n "$RET" ]
  then
    cfg_set "$cfg_param" "$RET"
  else
    cfg_disable "$cfg_param"
  fi
}

# check which of the provided to-check services are actually installed
# Note: this function is taken from libpam0g postinst
installed_services() {
  check="$@"

  # Only get the ones that are installed, and configured
  check=$(dpkg -s $check 2> /dev/null | egrep '^Package:|^Status:' | awk '{if ($1 ~ /^Package:/) { package=$2 } else if ($0 ~ /^Status: .* installed$/) { print package }}')

  # some init scripts don't match the package names
  check=$(echo $check | \
      sed -e's/\bapache2-common\b/apache2/g' \
          -e's/\bat\b/atd/g' \
          -e's/\bdovecot-common\b/dovecot/g' \
          -e's/\bdante-server\b/danted/g' \
          -e's/\bexim4-base\b/exim4/g' \
          -e's/\bheartbeat-2\b/heartbeat/g' \
          -e's/\bhylafax-server\b/hylafax/g' \
          -e's/\bpartimage-server\b/partimaged/g' \
          -e's/\bpostgresql-common\b/postgresql/g' \
          -e's/\bsasl2-bin\b/saslauthd/g' \
  )

  for service in $check; do
    idl="/etc/init.d/${service}"
    if [ -n "$idl" ] && [ -x $idl ]; then
      services="$service $services"
    else
      echo "WARNING: init script for $service not found." >&2
    fi
  done
  echo "$services"
}

# real functions begin here
if [ "$1" = "configure" ]
then
  # get configuration data from debconf
  . /usr/share/debconf/confmodule
  # check if the nslcd user exists
  if getent passwd nslcd >/dev/null
  then
    :
  else
    # create nslcd user and group
    adduser --system --group --home /var/run/nslcd/ \
            --gecos "nslcd name service LDAP connection daemon" \
            --no-create-home \
            nslcd
    # add uid/gid options to the config file if it exists
    # (this is when we're upgrading)
    if [ -f "$CONFFILE" ]
    then
      echo "Adding uid and gid options to $CONFFILE..." >&2
      echo "# automatically added on upgrade of nslcd package" >> "$CONFFILE"
      cfg_set uid nslcd
      cfg_set gid nslcd
    fi
  fi
  # create a default configuration
  create_config
  # rename tls_checkpeer to tls_reqcert
  if grep -qi '^tls_checkpeer[[:space:]]' $CONFFILE
  then
    echo "Renaming tls_checkpeer to tls_reqcert in $CONFFILE..." >&2
    sed -i 's/^tls_checkpeer[[:space:]]/tls_reqcert /' "$CONFFILE"
  fi
  # rename reconnect_maxsleeptime to reconnect_retrytime
  if grep -qi '^reconnect_maxsleeptime[[:space:]]' $CONFFILE
  then
    echo "Renaming reconnect_maxsleeptime to reconnect_retrytime in $CONFFILE..." >&2
    sed -i 's/^reconnect_maxsleeptime[[:space:]]/reconnect_retrytime /' "$CONFFILE"
  fi
  # rename tls_cacert to tls_cacertfile
  if grep -qi '^tls_cacert[[:space:]]' $CONFFILE
  then
    echo "Renaming tls_cacert to tls_cacertfile in $CONFFILE..." >&2
    sed -i 's/^tls_cacert[[:space:]]/tls_cacertfile /' "$CONFFILE"
  fi
  # comment out mapping of uniqueMember to member which is now used by default
  if grep -qi '^map[[:space:]]*group[[:space:]]*uniqueMember[[:space:]]*member[[:space:]]*$' $CONFFILE
  then
    echo "Commenting out uniqueMember mapping due to rename in $CONFFILE..." >&2
    sed -i '/^map[[:space:]]*group[[:space:]]*uniqueMember[[:space:]]*member[[:space:]]*$/i \
#off# automatically commented out next line because this is now the default
s/^map[[:space:]]*group[[:space:]]*uniqueMember[[:space:]]*member[[:space:]]*$/#off# &/' "$CONFFILE"
  fi
  # set server uri
  db_get nslcd/ldap-uris
  cfg_uris "$RET"
  # update some options
  update_config nslcd/ldap-base base
  db_get nslcd/ldap-auth-type
  authtype="$RET"
  case "$authtype" in
  simple)
    update_config nslcd/ldap-binddn binddn
    update_config nslcd/ldap-bindpw bindpw
    cfg_disable sasl_mech sasl_realm sasl_authcid sasl_authzid sasl_secprops krb5_ccname
    ;;
  SASL)
    update_config nslcd/ldap-sasl-mech sasl_mech
    update_config nslcd/ldap-sasl-realm sasl_realm
    # RFC4313 if SASL, binddn should be disabled
    cfg_disable binddn
    db_get nslcd/ldap-sasl-mech
    saslmech="$RET"
    case "$saslmech" in
    GSSAPI)
      update_config nslcd/ldap-sasl-krb5-ccname krb5_ccname
      cfg_disable sasl_authcid
      ;;
    *)
      update_config nslcd/ldap-sasl-authcid sasl_authcid
      update_config nslcd/ldap-bindpw bindpw
      cfg_disable krb5_ccname
      ;;
    esac
    update_config nslcd/ldap-sasl-authzid sasl_authzid
    update_config nslcd/ldap-sasl-secprops sasl_secprops
    ;;
  none)
    cfg_disable binddn bindpw
    cfg_disable sasl_mech sasl_realm sasl_authcid sasl_authzid sasl_secprops krb5_ccname
  esac
  update_config nslcd/ldap-reqcert tls_reqcert
  update_config nslcd/ldap-cacertfile tls_cacertfile
  # remove password from database
  db_set nslcd/ldap-bindpw ""
  # set ssl option
  db_get nslcd/ldap-starttls
  if [ "$RET" = "true" ]
  then
    cfg_set ssl "start_tls"
  elif grep -qi '^ssl[[:space:]]*start_*tls' $CONFFILE
  then
    cfg_disable ssl
  fi

  # when upgrading from an pre-0.9 version of the package check to restart
  # applications that otherwise may no longer be able to lookup or
  # authenticate users (when nslcd is being configured, both modules should
  # already be unpacked and will be loaded by restarted services)
  if dpkg --compare-versions "$2" lt-nl "0.9"
  then
    # code heavily based on eglibc and pam postinst

    echo "Checking for services that may need to be restarted..."
    check="apache2-common at bayonne cherokee courier-authdaemon"
    check="$check cron cups"
    check="$check dante-server diald dovecot-common exim exim4-base"
    check="$check fcron fireflier-server freeradius gdm heartbeat"
    check="$check heartbeat-2 hylafax-server iiimf-server inn2"
    check="$check kannel linesrv linesrv-mysql lsh-server"
    check="$check muddleftpd netatalk nuauth partimage-server"
    check="$check perdition pgpool popa3d"
    check="$check postgresql-common proftpd pure-ftpd"
    check="$check pure-ftpd-ldap pure-ftpd-mysql"
    check="$check pure-ftpd-postgresql racoon samba sasl2-bin"
    check="$check sfs-server solid-pop3d squid squid3 tac-plus"
    check="$check vsftpd wu-ftpd wzdftpd xrdp yardradius yaws"
    # only restart wdm and xdm if no-one is logged in in X
    if ! who | awk '{print $2}' | grep -q ':[0-9]'
    then
      check="$check wdm xdm"
    fi
    services=$(installed_services "$check")

    if [ -n "$services" ]
    then
      db_input critical libraries/restart-without-asking || true
      db_go || true
      db_get libraries/restart-without-asking
      if [ "$RET" != true ]
      then
        db_reset nslcd/restart-services
        db_set nslcd/restart-services "$services"
        db_input critical nslcd/restart-services || true
        db_go || true
        db_get nslcd/restart-services

        if [ "x$RET" != "x" ]
        then
          services=$RET
        else
          services=""
        fi
      fi
      echo
      if [ "$services" != "" ]; then
        echo "Restarting services possibly affected by the upgrade:"
        failed=""
        rl=$(runlevel | sed 's/.*\ //')
        for service in $services; do
          idl="invoke-rc.d ${service}"

          case "$service" in
            gdm)
              echo -n "  $service: reloading..."
              if $idl reload > /dev/null 2>&1; then
                echo "done."
              else
                echo "FAILED! ($?)"
                failed="$service $failed"
              fi
              continue
            ;;
          esac
          echo -n "  $service: stopping..."
          $idl stop > /dev/null 2>&1 || true
          sleep 1
          echo -n "starting..."
          if $idl start > /dev/null 2>&1; then
            echo "done."
          else
            echo "FAILED! ($?)"
            failed="$service $failed"
          fi
        done
        echo
        if [ -n "$failed" ]; then
          db_subst nslcd/restart-failed services "$failed"
          db_input critical nslcd/restart-failed || true
          db_go || true
        else
          echo "Services restarted successfully."
        fi
        echo
      fi
    else
      echo "Nothing to restart."
    fi

    if who | awk '{print $2}' | grep -q ':[0-9]'
    then
      dms=""
      for service in wdm xdm; do
        case "$services" in
          *$service*)   ;;
          *)    dms="$dms $service"
        esac
      done
      services=$(installed_services "$dms")
      if [ -n "$services" ]; then
        db_input critical nslcd/xdm-needs-restart || true
        db_go || true
      fi
    fi
  fi

  # we're done
  db_stop
fi


# Automatically added by dh_python2:
if which pycompile >/dev/null 2>&1; then
	pycompile -p pynslcd /usr/share/pynslcd -V 2.6-
fi

# End automatically added section
# Automatically added by dh_installinit
if [ -x "/etc/init.d/pynslcd" ]; then
	update-rc.d pynslcd defaults >/dev/null
	if [ -n "$2" ]; then
		_dh_action=restart
	else
		_dh_action=start
	fi
	invoke-rc.d pynslcd $_dh_action || exit $?
fi
# End automatically added section


exit 0